WRIS WX21137007

About Us

Loan Programs

Loan Calculator

WRIS

Internet Mapping

WRIS Portal

System Data

Project Profile Data

Cleaner Water Program Funding

SRF Project Funding

Area Water Management Planning Councils

Downloadable Reports

Water Management Coordinators

ADD GIS Staff

Legislation
& Regulations

WRIS Contact

Don Schierer
502-892-3486
E-mail

Working...

Drinking Water Project Profile:

View Map

Project Title:	Stanford Water Plant Expansion and Rehabilitation
Project Number:	WX21137007	AWMPC:	BGADD
Funding Status:	Not Funded	Date Approved by AWMPC:	01.17.2003
Project Status:	Approved	Primary County:	Lincoln
Project Schedule:	0-2 Years	Planning Unit:	Unit 3
E-ClearingHouse SAI:		ECH Status:
Primary System:	KY0690417 Stanford Water Commission	ADD WMC Contact:	Karyn Leverenz
Legal Applicant:	Stanford Water Commission
Entity Type:	Municipal Utility, Board, or Commission

Narrative
Applicant
AdministrationBudget
& Schedule
Impacts
ComponentsSustainable
Infrastructure
Audit
Map

Project Title:
Stanford Water Plant Expansion and Rehabilitation

Project Description:
The City of Stanford Waterworks has identified the need to expand and rehabilitate their existing water treatment plant. The area is experiencing rapid growth, both in residential and commercial customers. The existing treatment plant will not be able to meet the peak demands of these customers, and will need to be expanded in order to maintain the City's economic viability. The existing facility has also not received any significant maintenance in recent years, and the project will include new filter media and a new air scour system for increased backwash efficiency. The complete project will include a new solids contact up-flow clarifier, two (2) new filters, a new 300,000 gallon clearwell, new sludge handling facilities, new high service pumps and plant rehabilitation including painting and new facility lighting. Security features for WTP include new security fence with gates, a new security system (cameras, gate intercom, etc.), as well as security lighting outside. The WTP will also receive new lighting inside the facility to improve illumination in process areas and reduce energy consumption. No security components were listed for the distribution system. Only security improvements will be made at the WTP.

Need For Project: Briefly describe how this project promotes public health or achieves and/or maintains compliance with the Clean Water Act or Safe Drinking Water Act:
This increase in plant capacity will be required to meet customer demand for both existing and future customers, and will improve water quality to both residential and wholesale customers. These needed improvements will ensure Stanford maintains their compliance with SDWA standards.

Project Alternatives:

Alternate A:

Note: If project includes the construction of a new treatment plant or upgrade to existing plant, please explain regionalization options here.

Complete project in phases.

Alternate B:

Rehabilitate existing plant and construct interconnect with another utility.

Entity Information
Entity Type:	Municipal Utility, Board, or Commission
Entity Name:	Stanford Water Commission
PSC Group ID:	8808200
Office EMail:	rowens@stanfordwater.com
Web URL:	http://www.stanfordwater.com/index.html
Office Phone:	606-365-4510	Fax:	606-365-1023

Entity Address Information
	Mail Address	Physical Address
Address Line 1:	PO Box 45	842 E Main St
Address Line 2:
City, State Zip:	Stanford , KY 40484	Stanford , KY 40484

Entity Contact Information
Contact Type	Name	Title	EMail	Phone	Cell
Business Contact:	Shanna True	Office Manager	strue@standfordwater.com	606-365-4510
Authorized Official:	Dalton Miller	Mayor	mayor@stanfordky.gov	606-365-4500

Information Source:	Kentucky Infrastructure Authority
Date Last Modified:	05.07.2021

Project Administrator (PA) Information

Name:	Brandon Hamilton
Title:	Engineer
Organization:	Kenvirons, Inc.
EMail:	bhamilton@kenvirons.com
Phone:	502-695-4357 Fax: 502-695-4363
Address Line 1:	452 Versailles Rd
Address Line 2:
City, State Zip:	Frankfort , KY 40601

Applicant Contact (AC) Information

Name:	Ryan Owens
Title:	General Manager
Organization:	Stanford Water Commission
EMail:	rowens@stanfordwater.com
Phone:	606-365-4510 Fax: 606-365-1023
Address Line 1:	842 E Main St
Address Line 2:	PO Box 45
City, State Zip:	Stanford , KY 40484

Project Engineer (PE) Information

This project requires a licensed Professional Engineer.

A Professional Engineer has been procured for this project.

Licensed Engineer Information

License Number:	PE 18628
PE Name:	Richard Vaughn Williams
Firm Name:	Kenvirons, Inc.
Address Type:	Work
Address Line 1:	Kenvirons, Inc.
Address Line 2:	452 Versailles Rd.
Address Line 3:
City, State Zip:	Frankfort , KY 40601
License Status:	Current	Disciplinary Actions:	No
Issue Date:	02.15.1995	Expiration Date:	06.30.2026

Phone:	502∙695∙4357 Fax: 502∙695∙4363
EMail:	vwilliams@kenvirons.com

Engineering Firm Information
Permit Number:	62
Firm Name:	Kenvirons, Inc.
Phone:	502∙695∙4357 Fax: 502∙695∙4363
Web URL:	http://www.kenvirons.com/
E-Mail:	vwilliams@kenvirons.com
Address Line 1:	770 Wilkinson Blvd
Address Line 2:
City, State Zip:	Frankfort , KY 40601
Issue Date:	03.02.1993	Expir. Date:	12.31.2024
Permit Status	Current	Disciplinary Actions	No

Estimated Budget As-Bid Budget

Project Cost Categories
Cost Category	Cost
Administrative Expenses:
Legal Expenses:	$41,000
Land, Appraisals, Easements:
Relocation Expense & Payments:
Planning:
Engineering Fees - Design:	$319,200
Engineering Fees - Construction:	$79,800
Engineering Fees - Inspection:	$270,000
Engineering Fees - Other:	$40,000
Construction:	$6,000,000
Equipment:
Miscellaneous:	$100,000
Contingencies:	$550,000
Total Project Cost:	$7,400,000

Construction Cost Categories
Cost Category	Cost
Treatment:	$6,000,000
Transmission and Distribution:
Lead Remediation:
Source:
Storage:
Purchase of Systems:
Restructuring:
Land Acquisition:
Non-Categorized :
Total Construction Cost:	$6,000,000

Total Sustainability Costs:	$250,000

Note:

Sustainability costs are included within other costs
reported in this tab. This breakout, when provided,
is for SRF review purposes.

Project Funding Sources

Total Project Cost:	$7,400,000
Total Committed Funding:
Funding Gap:	Not Funded

Funding Source	Loan or Grant ID	Fiscal Year	Amount	Status	Applicable Date
KIA SRF Fund F Loan (DW)	F21-022	2021	$4,000,000	Withdrawn	07-07-2023
USDA RD Loan		2021	$2,550,000	Anticipated
USDA RD Grant		2021	$850,000	Anticipated
Total Committed

Funding Source Notes

Estimated Project Schedule

Estimated Environmental Review Submittal Date:	12.31.2020
Estimated Bid Date:	07.30.2021
Estimated Construction Start Date:	10.30.2021
Estimated Construction Completion Date:	10.31.2022

The following systems are beneficiaries of this project:

	KY0690417	Stanford Water Commission
	KY0690278	McKinney Water District

Checked box indicates primary system for this project.

Project Ranking by AWMPC:

Regional Ranking(s):
Planning Unit Ranking:
Total Points:

Plans and Specifications:

Plans and specs have been sent to DOW.

Plans and specs have been reviewed by DOW.

Plans and specs have been sent to PSC.

Plans and specs have been reviewed by PSC.

Economic Impacts
Jobs Created:	700
Jobs Retained:

MHI Basis:

Demographic Impacts (GIS Census Overlay)
Serviceable Demographic	Project Area	Included Systems	Included Utilities
Population:		7,753	7,753
Households:		3,437	3,437
MHI:		$53,123	*$53,123
MHI MOE:		$11,550	$11,550
MOE as Percent:		22%	22%
**NSRL:		1	1

Population and household counts are based on the 2020 Census DEC Redistricting Data (PL 94-171) dataset.

Median Household Income (MHI) Source: American Community Survey 2018-2022 5 Yr Estimates (Table B19013 *(for the primary system operated by the above listed beneficiary utilities).

MHI MOE = Med HH Income Margin of Error.

** NSRL (Non-Standard Rate Levels):
  0 = Greater than or equal to Kentucky MHI (KMHI).
  1 = Between 80% KMHI and KMHI (exclusive).
  2 = Less than or equal to 80% KMHI.
  - KMHI = $60,183
  - 80% KMHI = $48,146

New Customers
New Residential Customers:
New Commercial Customers:
New Institutional Customers:
New Industrial Customers:

New or Improved Service
Service Demographic	Survey Based	Census Overlay*
To Unserved Households:
To Underserved Households:	3,530
To Total Households:	3,530
**Cost Per Household:	$2,096

*	GIS Census block overlay figures are estimates of population and households potentially served by systems and projects based on a proximity analysis of relevant service lines to census block boundaries published for the 2010 SF1 dataset.
**	Cost per household is based on surveyed household counts, not GIS overlay values.

Geographic Impacts
For Project Area

Counties

Lincoln

Legislative Districts

District Name	Legislator
House 080	David Meade
Senate 21	Brandon J. Storm
Congressional 5	Hal Rogers

HUC 10 Watersheds

HUC 10 Code	Watershed Name
0510020504	Upper Dix River

Geographic Impacts
For Included System(s)

Counties

Boyle

Casey

Lincoln

Legislative Districts

District Name
House 054	Daniel Elliott
House 080	David Meade
Senate 12	Amanda Mays Bledsoe
Senate 21	Brandon J. Storm
Congressional 1	James Comer
Congressional 5	Hal Rogers

DW Specific Impacts:

	This project relates to a public health emergency.
	This project will assist a non-compliant system to achieve compliance.
	This project will assist a compliant system to meet future requirements.
	This project will provide assistance not compliance related.
	This project is necessary to achieve full or partial compliance with a court order, agreed order, or a judicial or administrative consent decree.
	Primary system has not received any SDWA Notices of Violation within the previous state fiscal year (July through June).
	Primary system has had an action level exceedance (lead concentrations exceed an action level of 15 ppb in more than 10% of customer taps sampled) within the last compliance period.
	Primary system has received a lead trigger level exceedance (lead concentrations exceed a trigger level of 10 ppb in more than 10% of customer taps sampled) within the last compliance period.

Project Readiness LSL (Lead Inventory and Lead Service Line Replacement):

Lead Service Line Inventory:

A description of goals to be achieved and products to be created (e.g., electronic or GIS database; customer communication tools) when creating a lead service line inventory procedure, including a proposed timeline for achieving each goal.

Lead Service Line Replacement:

	A strategy for informing customers before a LSLR and a template for an agreement with the private property owner to replace the LSL.
	A process for documenting all property owners declining replacement of privately owned portion of LSL.
	A procedure for customers to flush service lines and premise plumbing of particulate lead.
	A proposed plan for conducting LSL replacement utilizing all requested funding.
	A funding strategy for conducting LSLRs utilizing all requested funding.

Project Inventory (Mapped Features):

Point Features:

DOW PermitID	Count	Feature Type	Purpose	Status	Existing Capacity	Proposed Capacity	Units
KY0690417	1	PUMP STATION	PUMP - FILL TANK	NEW
KY0690417	1	SECURITY	SECURITY - WATER TREATMENT PLANT	REHAB			EA
KY0690417	1	TRADITIONAL METER	METER - RAW WATER INTERCONNECT	REHAB			EA
KY0690417	1	WATER PUMP	ENERGY EFF - VFD DEVICE	REHAB			EA
KY0690417	1	WATER TREATMENT PLANT	EXPAND TO MEET PROJECTED NEEDS	WTP - EXPANSION	2.00	3.00	MGD
KY0690417	1	WATER TREATMENT PLANT	REHAB TECHNOLOGIES	WTP - UPGRADE	2.00		MGD

Administrative Components:

The following administrative components are included in this project:

Planning

Design

Construction

Management

Audits on Record
Associated With Applicant

Audit Year	Entity Name	Entity Relationship
2022	Stanford, City of	Parent
2021	Stanford, City of	Parent
2020	Stanford, City of	Parent

Regionalization Components:

Public Water Systems Eliminated:

This project includes the elimination of public water system(s) through merger or acquisition.

Water Treatment Plants Eliminated:

This project includes the elimination of water treatment plant(s).

Supplementation of Raw Water Supply:

This project includes supplementing the existing raw water supply.

Supplementation of Potable Water Supply:

This project includes supplementing the existing potable water supply.

Emergency Only Water Supply:

This project provides emergency only water supply.

Water Source Protection:

	This project will preventatively address PFAS or other emerging contaminants of the source water.
	This project will address current PFAS or other emerging contaminants of the source water.
	This project includes the rehabilitation of a dam or reservoir used primarily for drinking water.
	This project includes land acquisition for water source protection.

Water Treatment Components:

This project includes water treatment components.

Treatment Activities:

This project includes a new water treatment plant.

This project includes an expansion of an existing water treatment plant.

Current design capacity (MGD):	2.000
Proposed design capacity (MGD):	3.000

This project includes rehabilitation of an existing water treatment plant.

This project includes upgrades to an existing water treatment plant.

This project includes emergency power generators for treatment activities.

This project includes redundant treatment processes.

This project includes replacement of existing raw water lines.

Treatment - Upgrades/Modifications:

This project includes infrastructure options to meet Cryptosporidium removal/inactivation requirements.

This project includes infrastructure options to meet CT inactivation requirements.

This project includes treatment modifications to meet the Disinfectants/Disinfection Byproducts Rule at the water treatment plant.

Explanation of how disinfection treatment modifications will be achieved:

The primary clearwell at the existing WTP is located in the basement of the old WTP constructed in the 1950’s. The location creates difficulties in accessing the inside of the existing clearwell, and therefore cannot be drawn down, cleaned, and disinfected on a regular basis. With these difficulties in cleaning the existing clearwell, over time, organic materials, sludge and biofilms form and deposit inside the structure. This directly affects disinfectant dosage requirements. The ability to maintain optimal clearwell conditions allows operators greater control over disinfection requirements and ensure proper disinfection residuals prior to distribution. Other WTP improvements include replacing all existing filter media, improving capture and overall filter efficiency.

This project will provide treatment modifications for VOCs, IOCs, SOC, or Radionuclides.

This project includes treatment modifications to address Secondary Contaminants.

Treatment process modifications preventatively addresses PFAS and other emerging contaminants.

Treatment process modifications addresses current PFAS and other emerging contaminants.

Security:

This project includes security components for water treatment facilities.

Treatment facility security is achieved as follows:

Security features for WTP include new security fence with gates, a new security system (cameras, gate intercom, etc.), as well as security lighting outside. The WTP will also receive new lighting inside the facility to improve illumination in process areas and reduce energy consumption. No security components were listed for the distribution system. Only security improvements will be made at the WTP.

Water Distribution and Storage Components:

This project includes water distribution and/or storage components.

Water Line Extensions:

This project includes water line extension(s).

Redundancy Components:

This project includes emergency power generators for distribution and/or storage activities.

This project includes redundant distribution and/or storage processes.

Finished Water Quality:

This project includes infrastructure to address inadequate water turnover and disinfection byproducts (DBPs).

Number of Loops Created:

This project includes a tank mixing system.

Inadequate turnover and DBPs are addressed as follows:

Current clearwell design prevents significant drawdown which reduces turnover and the existing location is inaccessible. This configuration proves difficult to clean and remove any accumulated sediment and biofilm. New clearwell will be a standalone structure with easy entrance for maintenance. Hydraulic design will be such that clearwell level can be fluctuated, improving turnover rate and water quality.

Service Line Inventory:

This project includes implementation of a service line inventory.

Water Line Replacement:

This project replaces problem water lines (breaks, leaks, or restrictive flows due to age), water lines consisting of lead and/or asbestos-cement (AC), and/or inadequately sized water lines.
In-place or in-situ repair medhods will be used in lieu of water line replacement.
This project replaces lead service lines.

Water Loss in the Last 12 Months:

The system has experienced the following water loss over the past 12 months:

Water loss volume (MG):	-148.053
Water loss percent:	-100%

Water Storage and Pressure Components:

This project includes the construction of new water tank(s).

This project includes the replacement of existing water tank(s).

This project includes the rehabilitation of existing water tank(s).

This project includes the construction of new pump station(s).

Number of new pump stations:

This project includes new pump stations for filling water tanks.

This project includes new pump stations for boosting pressure.

This project includes the rehabilitation of existing pump station(s).

Security:

This project includes security components for water distribution infrastructure.

Distribution infrastructure security is achieved as follows:

No security components were listed for the distribution system. Only security improvements will be made at the WTP.

Green
InfrastructureWater
EfficiencyEnergy
EfficiencyEnvironmentally
InnovativeAsset
Management

Green Infrastructure:

Green stormwater infrastructure includes a wide array of practices at multiple scales that manage wet weather and that maintains and restores natural hydrology by infiltrating, evapotranspiring and harvesting and using stormwater. On a regional scale, green infrastructure is the preservation and restoration of natural landscape features, such as forests, floodplains, and wetlands, coupled with policies such as infill and redevelopment that reduce overall imperviousness in a watershed. On the local scale, green infrastructure consists of site and neighborhood-specific practices, such as:

Component		Cost
Item 1:	Bioretention
Item 2:	Trees
Item 3:	Green Roofs
Item 4:	Permeable Pavement
Item 5:	Cisterns
Total Cost:

* Indicates a business case may be required for this item.

If any box(es) above are checked, please describe each below.

Water Efficiency:

The use of improved technologies and practices to deliver equal or better services with less water. Water efficiency encompasses conservation and reuse efforts, as well as water loss reduction and prevention, to protect water resources for the future. Examples include:

Component		Cost
Item 1:	Installing or retrofitting water efficient devices such as plumbing fixtures and appliances (toilets, showerheads, urinals).
Item 2:	Installing any type of water meter in previously unmetered areas (can include backflow prevention if in conjunction with meter replacement).
Item 3:	Replacing existing broken/malfunctioning water meters with AMR or smart meters, meters with leak detection, backflow prevention.
Item 4:	Retrofitting/adding AMR capabilities or leak equipment to existing meters.
Item 5:	Conducting water utility audits, leak detection studies, and water use efficiency baseline studies, which are reasonably expected to result in a capital project or in a reduction in demand to alleviate the need for additional capital investment.
Item 6:	Developing conservation plans/programs reasonable expected to result in a water conserving capital project or in a reduction in demand to alleviate the need for capital investment.
Item 7:	Recycling and water reuse projects that replace potable sources with non-potable sources (Gray water, condensate, and wastewater effluent reuse systems, extra treatment or distribution costs associated with water reuse).
Item 8:	Retrofit or replacement of existing landscape irrigation systems to more efficient landscape irrigation systems.
Item 9:	Water meter replacement with traditional water meters.*
Item 10:	Distribution pipe replacement or rehabilitation to reduce water loss and prevent water main breaks.*
Item 11:	Storage tank replacement/rehabilitation to reduce water loss.*
Item 12:	New water efficient landscape irrigation system, where there currently is not one.*
Item 13:	Implementation of incentive programs to conserve water such as rebates.
Item 14:	Installing WaterSense labeled products (https://www.epa.gov/watersense)
Item 15:	Projects that result from a water efficiency related assessments (such as water audits, leak detection studies, conservation plans, etc.) as long as the assessments adhered to the standard industry practices referenced above.
Item 16:	Distribution system leak detection equipment, portable or permanent.
Item 17:	Automatic flushing systems (portable or permanent).
Item 18:	Pressure reducing valves (PRVs).
Item 19:	Internal plant water reuse (such as backwash water recycling).
Total Cost:

* Indicates a business case may be required for this item.

If any box(es) above are checked, please describe each below.

Energy Efficiency:

Energy efficiency is the use of improved technologies and practices to reduce the energy consumption of water projects, use energy in a more efficient way, and/or produce/utilize renewable energy. Examples include:

Component		Cost
Item 1:	Renewable energy projects, which are part of a public health project, such as wind, solar, geothermal, and micro-hydroelectric that provides power to a utility.
Item 2:	Utility-owned or publicly-owned renewable energy projects.
Item 3:	Utility energy management planning, including energy assessments, energy audits, optimization studies, and sub-metering of individual processes to determine high energy use areas.
Item 4:	Energy efficient retrofits, upgrades, or new pumping systems and treatment processes (including variable frequency drives (VFDs).*	$200,000
Item 5:	Pump refurbishment to optimize pump efficiency.*
Item 6:	Projects that result from an energy efficient related assessment.*
Item 7:	Projects that cost effectively eliminate pumps or pumping stations.*
Item 8:	Projects that achieve the remaining increments of energy efficiency in a system that is already very efficient.*
Item 9:	Upgrade of lighting to energy efficient sources.*	$50,000
Item 10:	Automated and remote control systems (SCADA) that achieve substantial energy savings.*
Total Cost:		$250,000

* Indicates a business case may be required for this item.

If any box(es) above are checked, please describe each below.

Replace existing inefficient high service pumps with newer, more efficient pumps on VFD's. Replace lighting in treatment facility with more efficient LED units.

Environmentally Innovative Projects:

Environmentally innovative projects include those that demonstrate new and/or innovative approaches to delivering services or managing water resources in a more sustainable way. Examples include:

Component		Cost
Item 1:	Total integrated water resources management planning, or other planning framework where project life cycle costs are minimized, which enables communities to adopt more efficient and cost-effective infrastructure solutions.
Item 2:	Plans to improve water quantity and quality associated with water system technical, financial, and managerial capacity.
Item 3:	Source water protection planning (delineation, monitoring, modeling).
Item 4:	Planning activities to prepare for adaptation to the long-term effects of climate change and/or extreme weather.
Item 5:	Utility sustainability plan consistent with EPA’s sustainability policy.
Item 6:	Greenhouse gas inventory or mitigation plan and submission of a GHG inventory to a registry as long as it is being done for an SRF eligible facility.
Item 7:	Construction of US Building Council LEED certified buildings, or renovation of an existing building.
Item 8:	Projects that significantly reduce or eliminate the use of chemicals in water treatment.*
Item 9:	Treatment technologies or approaches that significantly reduce the volume of residuals, minimize the generation of residuals, or lower the amount of chemicals in the residuals.*
Item 10:	Trenchless or low impact construction technology.*
Item 11:	Using recycled materials or re-using materials on-site.*
Item 12:	Educational activities and demonstration projects for water or energy efficiency (such as rain gardens).*
Item 13:	Projects that achieve the goals/objectives of utility asset management plans*
Total Cost:

* Indicates a business case may be required for this item.

If any box(es) above are checked, please describe each below.

Asset Management:

If a category is selected, the applicant must provide supporting documentation in PDF format to substantiate claims.

Asset Management Components

Last Rate Adjustment Date:	07.01.2017 Download Fee Schedule
Rate Adjustment Age (months):	78

System’s monthly water bill, based on 4,000 gallons, as a percentage of MHI:

0.49%

The system has an Asset Management Plan (AMP).

The system(s) involved in this project have specifically allocated funds for the rehabilitation and replacement of aging and deteriorating infrastructure.

Download Supporting Document

If any box(es) above are checked, please describe each below.

System reserves depreciation funds that over the costs of infrastructure replacement in both water and sewer. Page 3 of the submitted budget has a line item where the utility is funding a “Short Lived Asset Expense” account. The Value of $21,156 per year is independent of the required Bond Reserve Accounts for Debt Service.

Activity	Date
Profile Created:	05.15.2002
Profile Last Modified:	01.29.2020
General Info Last Modified:	12.12.2019
Narrative Last Modified:	01.24.2020
Admin Info Last Modified:	12.10.2019
Budget Info Last Modified:	12.10.2019
Impacts Info Last Modified:	12.10.2019
Plans & Specs Info Last Modified:	10.04.2010
Components Info Last Modified:	10.04.2010
GIS Last Modified:	01.24.2020

Deficiencies found in Components Tab:

Water Distribution:

− Number of Loops Created is a required input.

Direct viewing of map content is no longer available in this tab.

Click Here to view this map in a separate browser tab or window.