WRIS WX21035037

About Us

Loan Programs

Loan Calculator

WRIS

Internet Mapping

WRIS Portal

System Data

Project Profile Data

Cleaner Water Program Funding

SRF Project Funding

Area Water Management Planning Councils

Downloadable Reports

Water Management Coordinators

ADD GIS Staff

Legislation
& Regulations

WRIS Contact

Don Schierer
502-892-3486
E-mail

Working...

Drinking Water Project Profile:

This profile is currently locked (SRF Recipient).

View Map

Project Title:	Clearwell at Water Treatment Plant
Project Number:	WX21035037	AWMPC:	PUADD
Funding Status:	Fully Funded	Date Approved by AWMPC:	12.01.2015
Project Status:	Approved	Primary County:	Calloway
Project Schedule:	0-2 Years	Planning Unit:	Calloway
E-ClearingHouse SAI:	KY201808271007	ECH Status:	Approved
Primary System:	KY0180306 Murray Water System	ADD WMC Contact:	James Smith
Legal Applicant:	City of Murray
Entity Type:	Incorporated City

Narrative
Applicant
AdministrationBudget
& Schedule
Impacts
ComponentsSustainable
Infrastructure
Audit
Map

Project Title:
Clearwell at Water Treatment Plant

Project Description:
Demolition of an existing 1,000,000 gallon below-grade cast-in-place concrete clearwell, which has structural problems including a subsiding roof and a significantly cracked bottom slab with a new 1,000,000 gallon below grade cast-in-place clearwell. Site piping improvements are also included in the project to allow the City to operate either clearwell individually or both at the same time. In addition to the clearwell replacement, a new high service pumping station will be installed. The new high service pumping station will include three new high service pumps as part of this project to match the existing capacity of the WTP with space for a fourth high service pump for future expansion. The new high service pumping station will also include two new backwash pumps.

Need For Project: Briefly describe how this project promotes public health or achieves and/or maintains compliance with the Clean Water Act or Safe Drinking Water Act:
There are two clearwells at the Murray Water Treatment Plant. The 1,000,000 gallon Clearwell No. 1 was built in 1964 and the 1,000,000 gallon Clearwell No. 2 was built in 1996. Currently only Clearwell No. 2 is in service. Clearwell No.1 is currently out-of-service due to significant cracks in the bottom slab which could potentially allow groundwater leakage into the clearwell and into the finished water supply if Clearwell No.1 were placed in service. In addition , the soil above Clearwell No. 1 has settled, indicating a potential structural problem with the clearwell top slab. At 50 years old Clearwell No. 1 has reached the end of its useful life. Clearwell No. 1 will be replaced in-kind with a below grade cast-in-place 1,000,000 gallon clearwell. Site piping improvements are also included in the project to allow the City to operate either clearwell individually or both at the same time. In addition to the clearwell replacement, a new high service pumping station will be installed. Many of the electrical components and existing high service and backwash pumps at the WTP are in excess of 20 years old. Therefore, they are at or have exceeded their useful life and are in need of replacement. The new high service pumping station will include three new high service pumps to match the existing capacity of the WTP with space for a fourth high service pump for future expansion. The new high service pumping station will also include two new backwash pumps. All pumps will be equipped with new electrical components, motor controls, and variable frequency drives to provide the City more flexibility and energy efficiency in their operation.

Project Alternatives:

Alternate A:

Note: If project includes the construction of a new treatment plant or upgrade to existing plant, please explain regionalization options here.

Has to be done.

Alternate B:

Entity Information
Entity Type:	Incorporated City
Entity Name:	City of Murray
PSC Group ID:	8804900
Office EMail:	kim.miles@murrayky.gov
Web URL:
Office Phone:	270-762-0300	Fax:	270-762-0306

Entity Address Information
	Mail Address	Physical Address
Address Line 1:	500 Main St
Address Line 2:
City, State Zip:	Murray , KY 42071

Entity Contact Information
Contact Type	Name	Title	EMail	Phone	Cell
Business Contact:	Kim Miles	City Clerk	kim.miles@murrayky.gov	270-762-0300
Authorized Official:	Bob Rogers	Mayor	bob.rogers@murrayky.gov	270-762-0300

Information Source:	Kentucky Department for Local Government
Date Last Modified:	04.25.2024

Project Administrator (PA) Information

Name:	Marisa Stewart
Title:	Project Admin
Organization:	City of Murray Planning & Engineering
EMail:	marisa.stewart@murrayky.gov
Phone:	270-762-3500 Fax:
Address Line 1:	500 Main St
Address Line 2:
City, State Zip:	Murray , KY 42071

Applicant Contact (AC) Information

Name:	Jim Osborne
Title:	City Administrator
Organization:	City of Murray
EMail:	jim.osborne@murrayky.gov
Phone:	270-762-0350 Fax: 270-762-0331
Address Line 1:	500 Main St
Address Line 2:
City, State Zip:	Murray , KY 42071

Project Engineer (PE) Information

This project requires a licensed Professional Engineer.

A Professional Engineer has been procured for this project.

Licensed Engineer Information

License Number:	PE 28318
PE Name:	Andrew Richard Esarey
Firm Name:
Address Type:	Work
Address Line 1:	8003 Rochelle Road
Address Line 2:
Address Line 3:
City, State Zip:	Louisville , KY 40228
License Status:	Current	Disciplinary Actions:	No
Issue Date:	12.21.2011	Expiration Date:	06.30.2025

Phone:	502∙583∙7020 Fax:
EMail:	andrew.esarey@strand.com

Estimated Budget As-Bid Budget

Project Cost Categories
Cost Category	Cost
Administrative Expenses:
Legal Expenses:
Land, Appraisals, Easements:
Relocation Expense & Payments:
Planning:
Engineering Fees - Design:	$86,000
Engineering Fees - Construction:	$57,800
Engineering Fees - Inspection:	$198,000
Engineering Fees - Other:
Construction:	$4,250,453
Equipment:
Miscellaneous:
Contingencies:
Total Project Cost:	$4,592,253

Construction Cost Categories
Cost Category	Cost
Treatment:
Transmission and Distribution:	$938,855
Lead Remediation:
Source:
Storage:	$3,311,598
Purchase of Systems:
Restructuring:
Land Acquisition:
Non-Categorized :
Total Construction Cost:	$4,250,453

Total Sustainability Costs:

Note:

Sustainability costs are included within other costs
reported in this tab. This breakout, when provided,
is for SRF review purposes.

Project Funding Sources

Total Project Cost:	$4,592,253
Total Committed Funding:	$4,592,253
Funding Gap:	Fully Funded

Funding Source	Loan or Grant ID	Fiscal Year	Amount	Status	Applicable Date
KIA SRF Fund F Loan (DW)	F17-059	2017	$2,000,000	Expired	06-21-2016
Local		2018	$3,092,253	Committed	04-06-2017
KIA SRF Fund F Loan (DW)	F18-042	2018	$2,000,000	Expired	05-19-2017
KIA Fund B Loan	B19-003	2019	$1,500,000	Committed	11-13-2018
Total Committed			$4,592,253

Funding Source Notes

Estimated Project Schedule

Estimated Environmental Review Submittal Date:	01.01.2015
Estimated Bid Date:	04.06.2017
Estimated Construction Start Date:	07.10.2017
Estimated Construction Completion Date:	01.26.2019

The following systems are beneficiaries of this project:

KY0180306

Murray Water System

Checked box indicates primary system for this project.

Project Ranking by AWMPC:

Regional Ranking(s):
Planning Unit Ranking:
Total Points:

Plans and Specifications:

Plans and specs have been sent to DOW.

Plans and specs have been reviewed by DOW.

Plans and specs have been sent to PSC.

Plans and specs have been reviewed by PSC.

Economic Impacts
Jobs Created:
Jobs Retained:

MHI Basis:

Demographic Impacts (GIS Census Overlay)
Serviceable Demographic	Project Area	Included Systems	Included Utilities
Population:		22,078	22,078
Households:		10,232	10,232
MHI:		$42,934	*$42,934
MHI MOE:		$7,555	$7,555
MOE as Percent:		18%	18%
**NSRL:		2	2

Population and household counts are based on the 2020 Census DEC Redistricting Data (PL 94-171) dataset.

Median Household Income (MHI) Source: American Community Survey 2018-2022 5 Yr Estimates (Table B19013 *(for the primary system operated by the above listed beneficiary utilities).

MHI MOE = Med HH Income Margin of Error.

** NSRL (Non-Standard Rate Levels):
  0 = Greater than or equal to Kentucky MHI (KMHI).
  1 = Between 80% KMHI and KMHI (exclusive).
  2 = Less than or equal to 80% KMHI.
  - KMHI = $60,183
  - 80% KMHI = $48,146

New Customers
New Residential Customers:
New Commercial Customers:
New Institutional Customers:
New Industrial Customers:

New or Improved Service
Service Demographic	Survey Based	Census Overlay*
To Unserved Households:	10,301
To Underserved Households:
To Total Households:	10,301
**Cost Per Household:	$446

*	GIS Census block overlay figures are estimates of population and households potentially served by systems and projects based on a proximity analysis of relevant service lines to census block boundaries published for the 2010 SF1 dataset.
**	Cost per household is based on surveyed household counts, not GIS overlay values.

Geographic Impacts
For Project Area

Counties

Calloway

Legislative Districts

District Name	Legislator
House 005	Mary Beth Imes
Senate 01	Jason Howell
Congressional 1	James Comer

HUC 10 Watersheds

HUC 10 Code	Watershed Name
0604000601	Upper Clarks River

Geographic Impacts
For Included System(s)

Counties

Calloway

Legislative Districts

District Name
House 005	Mary Beth Imes
Senate 01	Jason Howell
Congressional 1	James Comer

DW Specific Impacts:

	This project relates to a public health emergency.
	This project will assist a non-compliant system to achieve compliance.
	This project will assist a compliant system to meet future requirements.
	This project will provide assistance not compliance related.
	This project is necessary to achieve full or partial compliance with a court order, agreed order, or a judicial or administrative consent decree.
	Primary system has not received any SDWA Notices of Violation within the previous state fiscal year (July through June).
	Primary system has had an action level exceedance (lead concentrations exceed an action level of 15 ppb in more than 10% of customer taps sampled) within the last compliance period.
	Primary system has received a lead trigger level exceedance (lead concentrations exceed a trigger level of 10 ppb in more than 10% of customer taps sampled) within the last compliance period.

Project Readiness LSL (Lead Inventory and Lead Service Line Replacement):

Lead Service Line Inventory:

A description of goals to be achieved and products to be created (e.g., electronic or GIS database; customer communication tools) when creating a lead service line inventory procedure, including a proposed timeline for achieving each goal.

Lead Service Line Replacement:

	A strategy for informing customers before a LSLR and a template for an agreement with the private property owner to replace the LSL.
	A process for documenting all property owners declining replacement of privately owned portion of LSL.
	A procedure for customers to flush service lines and premise plumbing of particulate lead.
	A proposed plan for conducting LSL replacement utilizing all requested funding.
	A funding strategy for conducting LSLRs utilizing all requested funding.

Project Inventory (Mapped Features):

Point Features:

DOW PermitID	Count	Feature Type	Purpose	Status	Existing Capacity	Proposed Capacity	Units
KY0180306	1	WATER TANK	ELIMINATE FAILING CLEAR WELL	REPLACE - DECOMMISSION	1,000,000.00		GALLONS
KY0180306	1	WATER TANK	REPLACE FAILING CLEAR WELL	REPLACE - NEW		1,000,000.00	GALLONS
KY0180306	1	WATER TREATMENT PLANT	ENERGY EFF - PUMP EFFICIENCY	WTP - UPGRADE	3.07		MGD
KY0180306	2	WATER PUMP	BACKWASH PUMP	NEW			EA
KY0180306	3	WATER PUMP	HIGH SERVICE PUMP	REHAB			EA

Administrative Components:

The following administrative components are included in this project:

Planning

Design

Construction

Management

Audits on Record
Associated With Applicant

Audit Year	Entity Name	Entity Relationship
2023	Murray, City of	Parent
2022	Murray, City of	Parent
2021	Murray, City of	Parent
2020	Murray, City of	Parent

Regionalization Components:

Public Water Systems Eliminated:

This project includes the elimination of public water system(s) through merger or acquisition.

Water Treatment Plants Eliminated:

This project includes the elimination of water treatment plant(s).

Supplementation of Raw Water Supply:

This project includes supplementing the existing raw water supply.

Supplementation of Potable Water Supply:

This project includes supplementing the existing potable water supply.

Emergency Only Water Supply:

This project provides emergency only water supply.

Water Source Protection:

	This project will preventatively address PFAS or other emerging contaminants of the source water.
	This project will address current PFAS or other emerging contaminants of the source water.
	This project includes the rehabilitation of a dam or reservoir used primarily for drinking water.
	This project includes land acquisition for water source protection.

Water Treatment Components:

This project includes water treatment components.

Treatment Activities:

This project includes a new water treatment plant.

This project includes an expansion of an existing water treatment plant.

This project includes rehabilitation of an existing water treatment plant.

This project includes upgrades to an existing water treatment plant.

This project includes emergency power generators for treatment activities.

This project includes redundant treatment processes.

This project includes replacement of existing raw water lines.

Treatment - Upgrades/Modifications:

This project includes infrastructure options to meet Cryptosporidium removal/inactivation requirements.

This project includes infrastructure options to meet CT inactivation requirements.

This project includes treatment modifications to meet the Disinfectants/Disinfection Byproducts Rule at the water treatment plant.

This project will provide treatment modifications for VOCs, IOCs, SOC, or Radionuclides.

This project includes treatment modifications to address Secondary Contaminants.

Treatment process modifications preventatively addresses PFAS and other emerging contaminants.

Treatment process modifications addresses current PFAS and other emerging contaminants.

Security:

This project includes security components for water treatment facilities.

Water Distribution and Storage Components:

This project includes water distribution and/or storage components.

Water Line Extensions:

This project includes water line extension(s).

Redundancy Components:

This project includes emergency power generators for distribution and/or storage activities.

This project includes redundant distribution and/or storage processes.

Finished Water Quality:

This project includes infrastructure to address inadequate water turnover and disinfection byproducts (DBPs).

Service Line Inventory:

This project includes implementation of a service line inventory.

Water Line Replacement:

This project replaces problem water lines (breaks, leaks, or restrictive flows due to age), water lines consisting of lead and/or asbestos-cement (AC), and/or inadequately sized water lines.
In-place or in-situ repair medhods will be used in lieu of water line replacement.
This project replaces lead service lines.

Water Loss in the Last 12 Months:

The system has experienced the following water loss over the past 12 months:

Water loss volume (MG):	200.931
Water loss percent:	18%

Water Storage and Pressure Components:

This project includes the construction of new water tank(s).

This project includes the replacement of existing water tank(s).

Number of replacement tank(s):	1
Number of tank(s) decommissioned:	1
Storage capacity of existing tank(s) being decommissioned:		gallons.
Proposed storage capacity of replacement tank(s):		gallons.

Reason for replacement storage:

Crack In Clearwell. Will continue to deteriorate

This project includes the rehabilitation of existing water tank(s).

This project includes the construction of new pump station(s).

This project includes the rehabilitation of existing pump station(s).

Security:

This project includes security components for water distribution infrastructure.

Green
InfrastructureWater
EfficiencyEnergy
EfficiencyEnvironmentally
InnovativeAsset
Management

Green Infrastructure:

Green stormwater infrastructure includes a wide array of practices at multiple scales that manage wet weather and that maintains and restores natural hydrology by infiltrating, evapotranspiring and harvesting and using stormwater. On a regional scale, green infrastructure is the preservation and restoration of natural landscape features, such as forests, floodplains, and wetlands, coupled with policies such as infill and redevelopment that reduce overall imperviousness in a watershed. On the local scale, green infrastructure consists of site and neighborhood-specific practices, such as:

Component		Cost
Item 1:	Bioretention
Item 2:	Trees
Item 3:	Green Roofs
Item 4:	Permeable Pavement
Item 5:	Cisterns
Total Cost:

* Indicates a business case may be required for this item.

If any box(es) above are checked, please describe each below.

Water Efficiency:

The use of improved technologies and practices to deliver equal or better services with less water. Water efficiency encompasses conservation and reuse efforts, as well as water loss reduction and prevention, to protect water resources for the future. Examples include:

Component		Cost
Item 1:	Installing or retrofitting water efficient devices such as plumbing fixtures and appliances (toilets, showerheads, urinals).
Item 2:	Installing any type of water meter in previously unmetered areas (can include backflow prevention if in conjunction with meter replacement).
Item 3:	Replacing existing broken/malfunctioning water meters with AMR or smart meters, meters with leak detection, backflow prevention.
Item 4:	Retrofitting/adding AMR capabilities or leak equipment to existing meters.
Item 5:	Conducting water utility audits, leak detection studies, and water use efficiency baseline studies, which are reasonably expected to result in a capital project or in a reduction in demand to alleviate the need for additional capital investment.
Item 6:	Developing conservation plans/programs reasonable expected to result in a water conserving capital project or in a reduction in demand to alleviate the need for capital investment.
Item 7:	Recycling and water reuse projects that replace potable sources with non-potable sources (Gray water, condensate, and wastewater effluent reuse systems, extra treatment or distribution costs associated with water reuse).
Item 8:	Retrofit or replacement of existing landscape irrigation systems to more efficient landscape irrigation systems.
Item 9:	Water meter replacement with traditional water meters.*
Item 10:	Distribution pipe replacement or rehabilitation to reduce water loss and prevent water main breaks.*
Item 11:	Storage tank replacement/rehabilitation to reduce water loss.*
Item 12:	New water efficient landscape irrigation system, where there currently is not one.*
Item 13:	Implementation of incentive programs to conserve water such as rebates.
Item 14:	Installing WaterSense labeled products (https://www.epa.gov/watersense)
Item 15:	Projects that result from a water efficiency related assessments (such as water audits, leak detection studies, conservation plans, etc.) as long as the assessments adhered to the standard industry practices referenced above.
Item 16:	Distribution system leak detection equipment, portable or permanent.
Item 17:	Automatic flushing systems (portable or permanent).
Item 18:	Pressure reducing valves (PRVs).
Item 19:	Internal plant water reuse (such as backwash water recycling).
Total Cost:

* Indicates a business case may be required for this item.

If any box(es) above are checked, please describe each below.

Energy Efficiency:

Energy efficiency is the use of improved technologies and practices to reduce the energy consumption of water projects, use energy in a more efficient way, and/or produce/utilize renewable energy. Examples include:

Component		Cost
Item 1:	Renewable energy projects, which are part of a public health project, such as wind, solar, geothermal, and micro-hydroelectric that provides power to a utility.
Item 2:	Utility-owned or publicly-owned renewable energy projects.
Item 3:	Utility energy management planning, including energy assessments, energy audits, optimization studies, and sub-metering of individual processes to determine high energy use areas.
Item 4:	Energy efficient retrofits, upgrades, or new pumping systems and treatment processes (including variable frequency drives (VFDs).*
Item 5:	Pump refurbishment to optimize pump efficiency.*
Item 6:	Projects that result from an energy efficient related assessment.*
Item 7:	Projects that cost effectively eliminate pumps or pumping stations.*
Item 8:	Projects that achieve the remaining increments of energy efficiency in a system that is already very efficient.*
Item 9:	Upgrade of lighting to energy efficient sources.*
Item 10:	Automated and remote control systems (SCADA) that achieve substantial energy savings.*
Total Cost:

* Indicates a business case may be required for this item.

If any box(es) above are checked, please describe each below.

Environmentally Innovative Projects:

Environmentally innovative projects include those that demonstrate new and/or innovative approaches to delivering services or managing water resources in a more sustainable way. Examples include:

Component		Cost
Item 1:	Total integrated water resources management planning, or other planning framework where project life cycle costs are minimized, which enables communities to adopt more efficient and cost-effective infrastructure solutions.
Item 2:	Plans to improve water quantity and quality associated with water system technical, financial, and managerial capacity.
Item 3:	Source water protection planning (delineation, monitoring, modeling).
Item 4:	Planning activities to prepare for adaptation to the long-term effects of climate change and/or extreme weather.
Item 5:	Utility sustainability plan consistent with EPA’s sustainability policy.
Item 6:	Greenhouse gas inventory or mitigation plan and submission of a GHG inventory to a registry as long as it is being done for an SRF eligible facility.
Item 7:	Construction of US Building Council LEED certified buildings, or renovation of an existing building.
Item 8:	Projects that significantly reduce or eliminate the use of chemicals in water treatment.*
Item 9:	Treatment technologies or approaches that significantly reduce the volume of residuals, minimize the generation of residuals, or lower the amount of chemicals in the residuals.*
Item 10:	Trenchless or low impact construction technology.*
Item 11:	Using recycled materials or re-using materials on-site.*
Item 12:	Educational activities and demonstration projects for water or energy efficiency (such as rain gardens).*
Item 13:	Projects that achieve the goals/objectives of utility asset management plans*
Total Cost:

* Indicates a business case may be required for this item.

If any box(es) above are checked, please describe each below.

Asset Management:

If a category is selected, the applicant must provide supporting documentation in PDF format to substantiate claims.

Asset Management Components

Last Rate Adjustment Date:	01.01.2019 Download Fee Schedule
Rate Adjustment Age (months):	60

System’s monthly water bill, based on 4,000 gallons, as a percentage of MHI:

1.30%

The system has an Asset Management Plan (AMP).

The system(s) involved in this project have specifically allocated funds for the rehabilitation and replacement of aging and deteriorating infrastructure.

If any box(es) above are checked, please describe each below.

Activity	Date
Profile Created:	10.20.2015
Profile Last Modified:	11.28.2018
General Info Last Modified:	12.07.2015
Narrative Last Modified:	09.26.2018
Admin Info Last Modified:	11.28.2018
Budget Info Last Modified:	07.24.2018
Impacts Info Last Modified:	09.11.2018
Plans & Specs Info Last Modified:
Components Info Last Modified:	12.07.2015
GIS Last Modified:	07.27.2018

The profile is complete.

Direct viewing of map content is no longer available in this tab.

Click Here to view this map in a separate browser tab or window.